T-Handle Installation

A properly working lock and door handle on your vending machine is important to protecting the products and money in your machine. The T-handle on your vending machine may be installed or removed using the simple techniques shown in this video tutorial. To execute this process, you will need a Phillips screwdriver and 10 mm socket.

Start by releasing the machine's T-handle. This can be achieved by removing the two Phillips screws from the front and the corresponding 10mm nuts from the rear. After you have removed the screws and nuts, you may detach the T-handle.

The next step is the installation of the T-handle. This is even easier. All you have to do is put it in place and insert the Philip screws in the front and the 10 mm nuts at the back. And yes, it is that easy to accomplish, and you can do it like a pro! 

If you need assistance replacing your vending machine’s barrel lock watch this video. Also, don’t forget to view our assortment of locks and handle parts and resources here.

Replacing your T-Handle may be completed fast and effortlessly, but if you're having trouble, don’t hesitate to visit our Help Center.